The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to gauge the oil level inside large tanks, gearboxes and reservoirs. The OLI is a clear acrylic column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs.
* Stainless steel fittings and breather cap sold separately.
Did You Know…
Particle contamination is responsible for as much as 80% of machine wear?
Moisture contamination is the second most destructive contaminate in most systems.
It costs ten times as much to remove contamination from equipment than it does to exclude it?
Specifications
ND-2 Breather
*Sold separately
Idle/Maximum Oil Level Marker
Running/Minimum Oil Level Marker
Stainless Steel Fitting
*Sold separately
Material
Stain-resistant acrylic
Recommended Temperature Range
– -40˚F to 200˚F
– -40˚C to 93˚C
Maximum Operating Pressure
– 65 psi – 4.48 bar
Chemical Compatability
All mineral and synthetic oils
Available Options
– Lengths ranging from 3″ to 15″
– Stainless steel fittings
– 2 micron breather cap (3″ to 12″ models)
– Custom lengths available upon request
- Pumps
- Gearboxes
- Storage Tanks
Sizes
| Part # | Description | Overall Length | Outside Diameter |
|---|---|---|---|
| DC-OLI3 | 3″ OLI – 1/2″ MNPT x 1/2″ MNPT | 3 in / 7.62 cm | 0.875 in / 2.223 cm |
| DC-OLI6 | 6″ OLI – 1/2″ MNPT x 1/2″ MNPT | 6 in / 15.24 cm | 0.875 in / 2.223 cm |
| DC-OLI9 | 9″ OLI – 1/2″ MNPT x 1/2″ MNPT | 9 in / 22.86 cm | 0.875 in / 2.223 cm |
| DC-OLI12 | 12″ OLI – 1/2″ MNPT x 1/2″ MNPT | 12 in / 30.48 cm | 0.875 in / 2.223 cm |
| DC-OLI15 | 15″ OLI – 1/2″ MNPT x 1/2″ MNPT | 15 in / 38.10 cm | 0.875 in / 2.223 cm |
Need Assistance
Looking for additional information or want to move forward with your reliability program?